EconTool Nissan/Toyota ELM327 3.31

Communication Program for Nissan and Toyota Vehicles

The program is capable of working with Nissan vehicles manufactured between 1990 and 2014. While operation on vehicles produced after 2014 is feasible, it is not guaranteed.

For Nissan vehicles, the program offers support for ECUs that can be diagnosed through various methods:

• Rx, Tx lines (Nissan Consult I NC1, Bluetooth, and USB adapters supported): Program supports Engine ECU, ABS, SRS, AT (RE4F03 and RE4F04 series), CVT (RE0F06 series).
• K-line (Nissan Consult II NC2, compatible with Bluetooth ELM327 adapters and USB K-line adapters such as VAG COM KKL 409.1): Program supports Engine ECU, ABS, SRS.
• CAN BUS (Nissan Consult III NC3, Bluetooth ELM327 adapters supported): Program supports Engine ECU, CVT (RE0F08 and beyond).

Diesel ECUs are not supported by the program.

For Toyota vehicles, the program offers diagnostics via K-line using an ELM327 adapter. However, current support is considered experimental.

The software provides the following operating modes for all control units:

• Data reading mode, including the ability to record logs and view them graphically.
• Board (trip) computer mode.
• Active test mode - allows control over actuators like fuel pumps and coolant fans.
• Error reading and resetting functionality.

Additional features are available for Nissan Consult II and III protocols include:

• Correction of ignition timing and idle speed.
• Throttle valve closed position learning, idle air supply learning, fuel adaptation reset.

Experimental support is available for Nissan Consult 3.

For CVTs and ATs, the program enables adjustments to engine braking intensity. Newer CVTs also feature a function to reset the fluid degradation counter.